Call Us +918037303504

Select Language

UMA ENTERPRISE

Cheap Lathe Machine

Price And Quantity

Unit of Price
Piece/Pieces
Minimum Order Quantity 1

Unit of Measure Piece/Pieces
Price
75000INR

Product Description

cheap lathe machine

Products Special Features of Lathe MACHINE:

One piece lathe bed casting ensures better rigidity
Head stock gears are of special alloy steel
Head stock spindle is ground and runs in one anti friction taper roller bearings and one ball bearings in front wall of head stock and one taper roller bearing in rear side wall of head stock.

Stand. Accessories OF Lathe Machine :

Electric Motor, V Belts, 2 MT Centers, Center Bush, Oil Can, Screw Driver, Set of Fixed Spanner, Set of Allen Keys, Tool Post Spanner, Carrier Plate

Optional Accessories of Lathe Machine :

Face plate, Steady rest, Follow rest, Rapid traverse of main saddle, Chuck flange, Independent dog chuck, Elec. Coolant pump with tank & fittings, Taper turning attachment, Machine Lamp with control transformer

All Geared Lathe Machine :

Technical Specification in mm

Perticular	250
Description
Height of Centre(mm)	250
Swing Over Bed (mm)	490
Swing Over Cross Slide (mm)	290
Distance Between Center (mm)	965mm
Max. Swing in Gap (mm)	770
BED
Bed Type	2 V & 2 Flat
Bed Width (mm)	325
Length of Gap in Front of Face Plate (mm)	240
HEAD STOCK
Number of Feeds	18
Spindel Speed Range : R.P.M.	32 TO 1650
Spindle Bore ( mm)	55
Spindle Taper Number	MT - 4
FEEDS AND THREADS
Number of Feeds	76
Range of longitudinal Feeds (mm/Rev)	0.026 to 0.936
Range of Cross Feeds (mm/rev)	0.016 to 0.62
Number of Threads	106
Range of Metric Threads/No.	0.2 to 7 mm (33)
Range of Inch Threads,No.	72 to 4 TPI (36)
Range of Module Threads/No.	0.3 to 3 Module (16)
Range of D.P. Threads/No.	44 to 8 D.P. (21)
Leed Screw Dia (mm)	38.1
Leed Screw Pitch (mm)	6 mm
SADDLE
Cross Slide Dimension (mm)	460 x 205
Cross Slide Travel (mm)	200
Compound Slide Traverse (mm)	150
TAIL STOCK
Spindle Dia (mm)	63.5
Spindle Taper Number	MT-4
Spindle Travel	175
Lateral Move to Tail Stock (mm)	5
MOTOR
Main MKotor (Kw.)	3

STANDARD ACCESSORIES

Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.

EXTRA ACCESSORIES

Collet attachment
Machine Lamp
Quick change Tool Post
Collet ( 1 mm to 25 mm ) each collet cost
Chuck Flange 8"
Coolant Pump & Fitting
Collet ( 4 mm to 40 mm ) each collet cost
Chuck Flange 10"
Carrier Plate
Taper Turning Attachment
Face plate ( 350 mm Dia )
Extra Center Height 2"
Rear Tool Post
Follow Rest
Digital Read out System (DRO)
Mechanical Brake
Steady Rest

Note :

All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalog.

Heavy Duty Lathe Machine :

Technical Specification in mm

Parts	Specification	Heavy-1	Heavy-2	Heavy-3	Heavy-4	Heavy-5
Bed	Length of Bed Width of Bed Lenght of Gap in Front of Face Plate	5' 6" (1708) 12.75" (323) 7" (178)	7' (2135) 12.75"(323) 7" (178)	9' (2745) 12.75"(323) 7" (178)	10' (3050) 12.75"(323) 7" (178)	12' (3650) 12.75" (323) 7" (178)
Capacity	Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide	10" (254) 19" (480mm) 20" (508) 7II (190mm) 6" (152mm)	10" (254) 19"(480mm) 38 " (965) 7II (190mm) 6" (152mm)	10" (254) 19" (480mm) 62 " (1575) 7II (190mm) 6" (152mm)	10" (254) 19" (480mm) 74 " (1880) 7II (190mm) 6" (152mm)	10" (254) 19"(480mm) 98 " (2490) 7II (190mm) 6" (152mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4
Tail Stock Spindle	Diameter Morse tapper Travel	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)
Speed	No. of speed RPM Low & High	8 25 to 450	8 25 to 450	8 25 to 450	8 25 to 450	8 25 to 450
Threads	Metric thread Inch thread Lead screw	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)
Electric	Motor Power	3 H.P III	3 H.P III	3 H.P III	3 H.P III	3 H.P III
Drive	Counter to spindle Counter to motor	C 72 x 2 no. B 72 x 2 no.	C 72 x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.
General	space (L x W x H)	81 x 45 x 50	99 x 45 x 50	122 x 45x50	134 x 45x 50	158 x 45 x 50

Technical Specification in mm

Parts	Specification	Medium 4' 6"	Medium 5' 3"	Medium 6
Bed	Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate	4' 6" (1370mm) 11 " (280mm) 5" (127mm) 5" (127mm)	5' 3 "(1600mm) 11 " (280mm) 5" (127mm) 5" (127mm)	6' (1830mm) 11 " (280mm) 5" (127mm) 5" (127mm)
Capacity	Height of Centre Admit between center Movement of cross slide Movement of comp. slide	8II (215mm) 20" (508mm) 6.75 (170mm) 5 " (127mm)	8II (215mm) 29" (740mm) 6.75 (170mm) 5 " (127mm)	8II (215mm) 38 " (965mm) 6.75 (170mm) 5 " (127mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	75mm x 6 TPI 2 1/8 " (55mm) MT - 4	75mm x 6 TPI 2 1/8 " (55mm) MT - 4	75mm x 6 TPI 2 1/8 " (55mm) MT - 4
Tail Stock Spindle	Diameter Morse tapper Travel	2" (50.8mm) MT - 4 6' (152mm)	2" (50.8mm) MT - 4 6' (152mm)	2" (50.8mm) MT - 4 6' (152mm)
Speed	No. of speed RPM Low & High	6 45 to 450	6 45 to 450	6 45 to 450
Threads	Metric thread Inch thread Lead screw	M 1 to 6 2 to 24 1I" (31.75mm)	M 1 to 6 2 to 24 1I" (31.75mm)	M 1 to 6 2 to 24 1I" (31.75mm)
Electric	Motor Power	2 H.P III	2 H.P III	2 H.P III
Drive	Counter to spindle Counter to motor	B - 48 x 2 no. B - 57 x 2 no.	B - 48 x 2 no. B - 57 x 2 no.	B - 48 x 2 no. B - 57 x 2 no.
General	Floor space (L x W x H)	65" x 39" x 55"	76" x 39" x 58"	84" x 39" x 55"

STANDARD ACCESSORIES

Chuck Plate, Face Plate, Change Gear Set, Steady Rest, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note: Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Meduim Duty Lathe Machine :

STANDARD ACCESSORIES

Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Light Duty Lathe Machine :

Technical Specification in mm

Parts	Specification	Light 4II
Bed	Length of Bed Width of Bed Length of Gap	4II (1370mm) 9II" (242mm) 4" (100mm)
Capacity	Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide	6II" (165mm) 12II" (320mm) 26" (661mm) 5" (127mm) 3" (75mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	60mm x 8 TPI 1II (40mm) MT - 3
Tail Stock Spindle	Diameter Morse tapper Travel	1 5/8" (40mm) MT - 3 4 (100mm)
Speed	No. of speed RPM Low & High	8 40 to 950
Threads	Metric thread Inch thread Lead screw	M 1 to 6 2 to 24 1" (25.4mm)
Electric	Motor Power	1 H.P III
Drive	Counter to spindle Counter to motor	B -42 B -52
General	Floor space (L x W x H)	65" x 28" x 55"

STANDARD ACCESSORIES

Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Trade Information

Supply Ability 20 Per Month
Delivery Time 4-5 Days