0

Roll Turning Lathe Machine

Roll Turning Lathe Machine
Roll Turning Lathe Machine
Price And Quantity
  • 01
  • 195000INR
    Product Description

    roll turning lathe machine


     All Geared Lathe Machine :

    Tecnical Specification (MM)
    Perticular 250
    Description
    Height of Centre(mm) 250
    Swing Over Bed (mm) 490
    Swing Over Cross Slide (mm) 290
    Distance Between Center (mm) 965mm
    Max. Swing in Gap (mm) 770
    BED  
    Bed Type 2 V & 2 Flat
    Bed Width (mm) 325
    Length of Gap in Front of Face Plate (mm) 240
    HEAD STOCK  
    Number of Feeds 18
    Spindel Speed Range : R.P.M. 32 TO 1650
    Spindle Bore ( mm) 55
    Spindle Taper Number MT - 4
    FEEDS AND THREADS  
    Number of Feeds 76
    Range of longitudinal Feeds (mm/Rev) 0.026 to 0.936
    Range of Cross Feeds (mm/rev) 0.016 to 0.62
    Number of Threads 106
    Range of Metric Threads/No. 0.2 to 7 mm (33)
    Range of Inch Threads,No. 72 to 4 TPI (36)
    Range of Module Threads/No. 0.3 to 3 Module (16)
    Range of D.P. Threads/No. 44 to 8 D.P. (21)
    Leed Screw Dia (mm) 38.1
    Leed Screw Pitch (mm) 6 mm
    SADDLE  
    Cross Slide Dimension (mm) 460 x 205
    Cross Slide Travel (mm) 200
    Compound Slide Traverse (mm) 150
    TAIL STOCK  
    Spindle Dia (mm) 63.5
    Spindle Taper Number MT-4
    Spindle Travel 175
    Lateral Move to Tail Stock (mm) 5
    MOTOR  
    Main MKotor (Kw.) 3

     STANDARD ACCESSORIES

    Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.

    EXTRA ACCESSORIES

    »
    Collet attachment
    »
    Machine Lamp
    »
    Quick change Tool Post
    »
    Collet ( 1 mm to 25 mm ) each collet cost
    »
    Chuck Flange 8"
    »
    Coolant Pump & Fitting
    »
    Collet ( 4 mm to 40 mm ) each collet cost
    »
    Chuck Flange 10"
    »
    Carrier Plate
    »
    Taper Turning Attachment
    »
    Face plate ( 350 mm Dia )
    »
    Extra Center Height 2"
    »
    Rear Tool Post
    »
    Follow Rest
    »
    Digital Read out System (DRO)
    »
    Mechanical Brake
    »
    Steady Rest
    Note :
    (1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
    (2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalog.

     Heavy Duty Lathe Machine :

    Tecnical Specification (MM)
    Sr.No. Parts Specification Heavy-1 Heavy-2 Heavy-3 Heavy-4 Heavy-5
    1 Bed Length of Bed
    Width of Bed
    Lenght of Gap in Front of Face Plate
    5' 6" (1708)
    12.75" (323)
    7" (178)
    7' (2135)
    12.75"(323)
    7" (178)
    9' (2745)
    12.75"(323)
    7" (178)
    10' (3050)
    12.75"(323)
    7" (178)
    12' (3650)
    12.75" (323)
    7" (178)
    2 Capacity Height of Centre
    Swing over Bed
    Admit between center
    Movement of cross slide
    Movement of comp. slide
    10" (254)
    19" (480mm)
    20" (508)
    7II (190mm)
    6" (152mm)
    10" (254)
    19"(480mm)
    38 " (965)
    7II (190mm)
    6" (152mm)
    10" (254)
    19" (480mm)
    62 " (1575)
    7II (190mm)
    6" (152mm)
    10" (254)
    19" (480mm)
    74 " (1880)
    7II (190mm)
    6" (152mm)
    10" (254)
    19"(480mm)
    98 " (2490)
    7II (190mm)
    6" (152mm)
    3 Main Spindle Spindle Nose
    Spindle Bore
    Tapper Bore
    76 x 6 TPI
    2.1/8 (54)
    MT - 4
    76 x 6 TPI
    2.1/8 (54)
    MT - 4
    76 x 6 TPI
    2.1/8 (54)
    MT - 4
    76 x 6 TPI
    2.1/8 (54)
    MT - 4
    76 x 6 TPI
    2.1/8 (54)
    MT - 4
    4 Tail Stock Spindle Diameter
    Morse tapper
    Travel
    2.1/2" (63.5)
    MT - 4
    7" (178mm)
    2.1/2" (63.5)
    MT - 4
    7" (178mm)
    2.1/2" (63.5)
    MT - 4
    7" (178mm)
    2.1/2" (63.5)
    MT - 4
    7" (178mm)
    2.1/2" (63.5)
    MT - 4
    7" (178mm)
    5 Speed No. of speed
    RPM Low & High
    8
    25 to 450
    8
    25 to 450
    8
    25 to 450
    8
    25 to 450
    8
    25 to 450
    6 Threads Metric thread
    Inch thread
    Lead screw
    1 to 6
    2 to 24
    1II" (38mm)
    1 to 6
    2 to 24
    1II" (38mm)
    1 to 6
    2 to 24
    1II" (38mm)
    1 to 6
    2 to 24
    1II" (38mm)
    1 to 6
    2 to 24
    1II" (38mm)
    7 Electric Motor Power 3 H.P III 3 H.P III 3 H.P III 3 H.P III 3 H.P III
    8 Drive Counter to spindle
    Counter to motor
    C 72 x 2 no.
    B 72 x 2 no.
    C 72 x 2 no.
    B 72 x 2 no.
    C 72x 2 no.
    B 72 x 2 no.
    C 72x 2 no.
    B 72 x 2 no.
    C 72x 2 no.
    B 72 x 2 no.
    9 General space (L x W x H) 81 x 45 x 50 99 x 45 x 50 122 x 45x50 134 x 45x 50 158 x 45 x 50

     STANDARD ACCESSORIES

    Chuck Plate, Face Plate, Change Gear Set, Steady Rest, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

    Note: Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

    As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

    Meduim Duty Lathe Machine :

    Tecnical Specification (MM)
    Sr. No. Parts Specification Medium 4' 6" Medium 5' 3" Medium 6
    1 Bed Length of Bed
    Width of Bed
    Length of Gap
    Length of Gap in Front of Face Plate
    4' 6" (1370mm)
    11 " (280mm)
    5" (127mm)
    5" (127mm)
    5' 3 "(1600mm)
    11 " (280mm)
    5" (127mm)
    5" (127mm)
    6' (1830mm)
    11 " (280mm)
    5" (127mm)
    5" (127mm)
    2 Capacity Height of Centre
    Admit between center
    Movement of cross slide
    Movement of comp. slide
    8II (215mm)
    20" (508mm)
    6.75 (170mm)
    5 " (127mm)
    8II (215mm)
    29" (740mm)
    6.75 (170mm)
    5 " (127mm)
    8II (215mm)
    38 " (965mm)
    6.75 (170mm)
    5 " (127mm)
    3 Main Spindle Spindle Nose
    Spindle Bore
    Tapper Bore
    75mm x 6 TPI
    2 1/8 " (55mm)
    MT - 4
    75mm x 6 TPI
    2 1/8 " (55mm)
    MT - 4
    75mm x 6 TPI
    2 1/8 " (55mm)
    MT - 4
    4 Tail Stock Spindle Diameter
    Morse tapper
    Travel
    2" (50.8mm)
    MT - 4
    6' (152mm)
    2" (50.8mm)
    MT - 4
    6' (152mm)
    2" (50.8mm)
    MT - 4
    6' (152mm)
    5 Speed No. of speed
    RPM Low & High
    6
    45 to 450
    6
    45 to 450
    6
    45 to 450
    6 Threads Metric thread
    Inch thread
    Lead screw
    M 1 to 6
    2 to 24
    1I" (31.75mm)
    M 1 to 6
    2 to 24
    1I" (31.75mm)
    M 1 to 6
    2 to 24
    1I" (31.75mm)
    7 Electric Motor Power 2 H.P III 2 H.P III 2 H.P III
    8 Drive Counter to spindle
    Counter to motor
    B - 48 x 2 no.
    B - 57 x 2 no.
    B - 48 x 2 no.
    B - 57 x 2 no.
    B - 48 x 2 no.
    B - 57 x 2 no.
    9 General Floor space (L x W x H) 65" x 39" x 55" 76" x 39" x 58" 84" x 39" x 55"

     STANDARD ACCESSORIES

    Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

    Note :

    Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

    As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

    Light Duty Lathe Machine :

    Tecnical Specification (MM)
    Sr. No. Parts Specification Light 4II
    1 Bed Length of Bed
    Width of Bed
    Length of Gap
    4II (1370mm)
    9II" (242mm)
    4" (100mm)
    2 Capacity Height of Centre
    Swing over Bed
    Admit between center
    Movement of cross slide
    Movement of comp. slide
    6II" (165mm)
    12II" (320mm)
    26" (661mm)
    5" (127mm)
    3" (75mm)
    3 Main Spindle Spindle Nose
    Spindle Bore
    Tapper Bore
    60mm x 8 TPI
    1II (40mm)
    MT - 3
    4 Tail Stock Spindle Diameter
    Morse tapper
    Travel
    1 5/8" (40mm)
    MT - 3
    4 (100mm)
    5 Speed No. of speed
    RPM Low & High
    8
    40 to 950
    6 Threads Metric thread
    Inch thread
    Lead screw
    M 1 to 6
    2 to 24
    1" (25.4mm)
    7 Electric Motor Power 1 H.P III
    8 Drive Counter to spindle
    Counter to motor
    B -42
    B -52
    9 General Floor space (L x W x H) 65" x 28" x 55"

     STANDARD ACCESSORIES

    Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

    Note :

    Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

    Trade Information
    • 20 Per Month
    • 4-5 Days
      Contact Us

      Vavdi Ind. Area, Survey No.18, Plot No. 4, Opp. Poonam Dumper Street, Near Moonlight Marble Rajkot Gujarat India +918037303504
      Phone :+918037303504